FRAME PROTECTION DYEDBRO BONES BLACK

Protective vinyl adhesive 300 micron thick, printed with latex inks,

pre-cut to fit different bicycle frames.

It may be necessary to cut certain parts with a pair of scissors or a cutter for a perfect adaptation to the support.

CONTENT OF THE PRODUCT:

• 1 adhesive 52cm x 9cm rectangular for lower tube
• 1 adhesive of 52.5 to 60cm x 9cm ergonomic for upper tube
• 4 adhesives of 37.5cm x 4.3cm for back base
• 1 promotional adhesive
• 1 plastic applicator

Weight (gross total between): 150 and 200g
 

PROTECTIVE FILM FEATURES:

• Thickness in microns: 300 (indicative value)
• Tensile strength (N / 25mm): min.100
• Elongation at break (%): min. 100
• 168 hours contraction at 70 ° C: <1.5mm
• Adhesive based on acrylic solvent
• Immediate and permanent adhesion